APA WRAPPED BUNDLE SET - Dissolving Light 2.0 Series - OD Green

The easiest way to find the WIDTH of your stabilizer is to wrap a piece of paper around stabilizer shaft, then make a mark and measure for width dimension. Some overlap is acceptable and can make wrapping easier. 

Measuring the LENGTH is a straight measurement from top to bottom of the stabilizer shaft. Wraps can be cut down with a razor blade if need be to achieve a perfect fit.

• 0.85″ – Fits most Micro-diameter Arrow Shafts
• 0.95" – Fits most Small-diameter Arrow Shafts 
• 1.00″ – Fits most Standard-diameter Arrow Shafts (<500 Spine)
• 1.13″ – Fits most Stiffer Spine Arrow Shafts (>400 Spine) and Crossbow Bolts
• 1.25″ - Fits most Fatboy Style Arrow Shafts (23/64″)
• 1.40″ - Fits most Large-diameter Arrow Shafts (27/64”)

Note that the Vinyl Material can be difficult to adhere to certain stabilizer shafts. In this case a simple application of heat can fix the adhesive issue by making the glue more sticky. Heat should be applied in a generous amount to the seam and immediately be pressed down with your finger to achive a secure ahedision. Please note that a heat gun or blow dryer is typically needed for a firm-grip on this material.  

Due to the many variations in monitors and browsers, color samples may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. Colors may also vary from set to set based on ink batch variations in production.